$15 flat for cap and left chest logos up to 4 inches wide. Jacket back digitizing starts at $20 for small backs and goes to $75 for large complex designs over 10 inches. 3D puff digitizing starts at $25. Applique digitizing starts at $20. Small lettering is $15. All prices include every embroidery file format and unlimited free revisions.

Standard delivery is 2 to 4 hours from artwork approval for most designs including caps, left chest logos, 3D puff, and small lettering. Jacket back designs with high stitch counts take 4 to 6 hours. Rush delivery in 1 to 2 hours is available at no extra cost; just note RUSH on your order.

All 20+ embroidery file formats are included at no extra charge: DST for Tajima and most commercial machines, PES for Brother and Babylock, JEF for Janome, VP3 for Husqvarna Viking, EXP for Melco and Bernina, TAP for Happy, HUS for older Husqvarna, and XXX for Singer. The EMB editable Wilcom source file is also included with every order.

No. Every file is built 100% manually in Wilcom V9 and E2 by one of our 38 professional digitizers. We never use Wilcom's auto-digitizing features, auto-font generation, or batch processing tools on any order at any price. Manual digitizing produces production-ready files that run correctly on the first sew-out.

Upload your artwork in any format: JPG, PNG, PDF, AI, or EPS. Tell us your machine brand and model, the design placement (cap front, left chest, jacket back, etc.), and the size in inches. If you have a specific fabric type such as a structured cap or softshell jacket, mention it so we can adjust density and underlay settings correctly.

No. Unlimited free revisions are included on every order. If any adjustment is needed after testing the file on your machine (size, density, color sequence, stitch direction, or lettering readability), email us with the details and we return the revised file within 2 to 4 hours at no charge.

Yes. Cap digitizing is our most common order. Caps require specialized curved-surface compensation settings that standard flat-garment digitizing does not apply. We set correct underlay for structured vs. unstructured caps, reduce maximum stitch length to 4mm to prevent floating stitches on the curved panel, and apply pull compensation for cap fabric stretch. The flat rate is $15 for most cap designs.

DST is a universal stitch output file: it contains the finished stitch coordinates and color-change commands and is read directly by most commercial embroidery machines. EMB is Wilcom's editable project file that contains the design as adjustable embroidery objects. EMB is only useful if you have Wilcom software installed. We include both with every order at no extra cost.